Computer Accessories & Peripherals - Page 3801

Manufacturer: Silverstone Brand: SilverStone Technology Model: CP05 Color: Multi Color

CP05 is designed to enable users to easily hot-swap any 3.5” SATA hard drives in compatible hard drive cages(CFP52B?KL series and FT series cases) . High quality connectors and cables are used to ensure reliable and secure operation.

Manufacturer: MarginMart, Inc. Brand: C&E Model: CNE546766

Product Description Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps. While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required. C&E SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable while the other end uses a which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration. Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However, the data transfer of the SATA subsystem will be limited to that of the slowest device. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.5 Gbps.

Manufacturer: Dell Computers Brand: Dell Model: DC02000JZ00 Color: Black

Brand: Dell Part Number: N156F MPN: DC02000JZ00 Type: SATA Hard Drive Cable Connector Compatible Model: Dell Vostro 1710 Condition: New

Manufacturer: TRIPP LITE Brand: Tripp Lite Model: P948-12I Color: Red

Tripp Lite's P948-12i Slimline SATA cable, connects your slimline SATA drive to a standard SATA controller. This slimline SATA adapter with power splits a Slimline SATA connector into a standard SATA data cable (12 inches) and a power connector which plugs into any standard 4-pin 5V (molex LP4) connector. SATA-3.0 6Gbps supported. Key Features 12inch, SATA to SATA / Power Supports 6Gbps transfer Used with Slimline SATA drives such as CD / DVD drives Lifetime limited warranty

Manufacturer: MarginMart, Inc. Brand: C&E Model: CNE545967

Product Description Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps. While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required. C&E SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable while the other end uses a which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration. Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However, the data transfer of the SATA subsystem will be limited to that of the slowest device. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.5 Gbps.

Manufacturer: Tera Grand Brand: Tera Grand Model: RETN-WL081

For connecting home networking devices, such as cable modems, routers, hub, pc, notebooks, and gaming systems 24k Hardened gold contacts 10 Gigabit Ethernet Cable Provide excellent bandwidth beyond 600Mhz.

Manufacturer: .HP. Brand: .HP.

HP 25in Right Angle 7-Pin SATA Cable NEW 381868-016 7-Pin-to-7-Pin NEW Bulk

Manufacturer: Micro SATA Cables Brand: Micro SATA Cables

SATA III to mSATA Adapter with 2.5 Inch Housing The SATA III to mSATA Adapter with 2.5 Inch Housing is SATA III to mSATA adapter, providing one 7+15pin SATA connector on the host connection and one Mini PCI-e 52-pin connector on the SSD storage devices connection. The SATA III to mSATA Adapter with 2.5 Inch Housing adapter allows the installation of an mSATA SSD as system disk, boot the operating system directly without having to install any drivers, but does not affect the execution speed of the SSD storage devices. It works with DOS, Win95, Win98, Win XP, Win 2000 and Win7, Linux and Unix Specifications: • Fully compliant with SATA revision 3.0 • PCI Express Mini Card Electromechanical Specification 1.2 • PWM Power IC / 1.4MHz 5.5V synchronous buck converter • mSATA input voltage: 3.3V ±5%, input current: 3A • Data transfer rate: 6Gb/s bandwidth • Operating temperature - Commercial (0°C to +70°C) Supports mSATA SSD Sizes : • Full size: 50.95 mm (L) x 30mm (W) • Half size: 26.8 mm (L) x 30 mm (W) Supports mSATA Storage Device: • Sandisk U100 Series mSATA &compatible Storage • Samsung PM830 Series mSATA & compatible Storage • Micron RealSSD C400, C400v mSATA, Crucial mSATA & compatible Storage Micro SATA Cables PN # MSATA-SATA-3 HSG

Manufacturer: Molex Brand: Molex

Complete set includes matching male and female housings with all corresponding pinsVoltage maximum: 250 Sets per kit: 1Number of conductors: 24Pin layout: 4x6Amp: 5

Manufacturer: MarginMart, Inc. Brand: C&E Model: CNE546827

Product Description Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps. While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required. C&E SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable while the other end uses a which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration. Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However, the data transfer of the SATA subsystem will be limited to that of the slowest device. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.5 Gbps.